New Design of Triband Rectangular Printed Antenna With DGS for Mobile Communications

Authors

  • Mohammed Belhadj Khouloud Department of Electronic and Telecommunications, SSL Laboratory of Ain Temouchent, Belhadj Bouchaib University of Ain Temouchent, Ain Temouchent, Algeria
  • Souheyla Ferouani Department of Electronic and Telecommunications, LTT Laboratory of Tlemcen University, Belhadj Bouchaib University of Ain Temouchent, Ain Temouchent, Algeria
  • Marouf Fatima Zahra Department of Electrical Engineering, National Polytechnic School of Oran M-A Oran, Oran, Algeria
  • Ziani Kerarti Department of Post-Graduated and Specialties, National Polytechnic School of Oran, Oran, Algeria

DOI:

https://doi.org/10.26713/jims.v13i3.2009

Abstract

A new design of a rectangular printed antenna for mobile communication is presented in this paper. The material substrate chosen is Rogers 3003c \((\epsilon r=3)\) and DGS (Defected Ground Structure) is used for bandwidth enhancement. The proposed antenna resonates over 900, 1800 and 2600 MHz frequencies for 2G/3G and 4G cellular phone. CST Microwave studio simulates the proposed rectangular printed antenna characteristics such as return loss S11, VSWR (voltage standing wave ratio), Gain and Radiation pattern.

Downloads

Download data is not yet available.

Downloads

Published

2021-09-30
CITATION

How to Cite

Khouloud, M. B., Ferouani, . S., Zahra, . M. F., & Kerarti, Z. (2021). New Design of Triband Rectangular Printed Antenna With DGS for Mobile Communications. Journal of Informatics and Mathematical Sciences, 13(3), 143–147. https://doi.org/10.26713/jims.v13i3.2009

Issue

Section

Research Articles